www.insigniarange.com
Last Modified: 07/10/2015
12
Step 6
Align the roof with your shower walls and using the
ST25
screws and
SW9
Washers
fix the back walls to the roof by screwing upwards from the rear of the shower.
NOTE:
You will notice you have 2 holes pre
-
cut in the front curve of the underside of
the roof. You need to pass the wires through for the front column lights here ready to
connect later.
if a small gap exists
silicone seal later
Step 7
Fit the adjustable wheels to the top and bottom of the glass doors and ensure the wheels
are at their lowest position and hang on the inner curved rails with the wheels facing the
outside of the glass.
Once all wheels are fitted and on the rails you can adjust the wheels by turning the plastic
bolt clockwise in which in turn will pull the wheels towards the track ensuring a secure a
tight fit.
Now grease the track to ensure a smooth and long lasting operation
(not supplied)
