Inseego Wavemaker FW2010, Руководство пользователя

Страница: 25 / 55

5G OUTDOOR CPE FW2010 USER GUIDE 25
Viewing Info About the FW2010
On the Admin Web UI Home page, the General Status panel shows general Internet connection and
system information.
Carrier:
The name of the Mobile Network Operator.
Technology : Indicates the current cellular data connection, for example, 5G Sub6.
Band:
The cellular network band in use for the current connection.
PCI: The Physical Cell ID that indicates the cellular tower/node to which the device is connected.
SIM Status:
The current status of the SIM card.
WAN Status: The current status of the WAN connection.
MDN:
The phone number of your FW2010.
IMEI: The International Mobile Equipment Identity (IMEI) for your FW2010. This is a 15 digit code used
to uniquely identify an individual device. The IMEI does not change when the SIM is changed.
Signal Strength (RSRP):
The strength of the cellular signal, measured in dBm. Higher absolute values
indicate a stronger signal, for example: -80 dBm is a stronger signal than -90 dBm.
SNR:
Signal to Noise Ratio. A ratio of signal power to noise power expressed in decibels. SNR is a
positive value, and higher numbers are better.
FW Version: The version of the firmware (software) currently installed on your FW2010.
IPv4:
The network IP address assigned to your computer, not your FW2010 device.