Inseego Wavemaker FW2010, Руководство пользователя

Страница: 23 / 55

5G OUTDOOR CPE FW2010 USER GUIDE 23
WAN Settings
NOTE:
WAN settings are available only with Inseego Connect.
Use this page to enable and configure WAN keep alive. Keep alive allows for a persistent WAN
connection.
Enable WAN Keep Alive: If ON, keep alive pings lookup addresses to verify cellular connectivity.
Lookup Address 1:
Enter the first IP address to ping to verify the WAN connection.
Lookup Address 2: Enter the second IP address to ping (if Lookup Address 1 does not respond with
keep alive acknowledgement (ACK)).
Lookup Address 3:
Enter the third IP address to ping (if Lookup Address 2 does not respond with
keepalive ACK).
Keep Alive Interval:
Enter the desired number of seconds without receiving a valid packet before the
first keep alive ping is sent.
Number of Attempts: Enter the number of times to retry after ping failure to all three lookup
addresses.
Retry Interval:
Enter the number of seconds between ping retries.