INOXPA KIBER KSF, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 19 / 32

Maintenance
INOXPA S.A.U.
·
01.611.30.08EN · (0) 2020/02 19
When mounting the new seal, be care to mount the parts and seals with soapy water to facilitate
their sliding.
8.6.3. Cooled mechanical seal
Disassembly
•
First follow the disassembly procedure described in chapter 8.7.1. Stator, rotor and connecting rod .
•
If the protections (47A) were not removed previously, remove them now.
•
Remove the raccords (92) of the cover (09A).
•
Loosen the pins (55) to remove the seal ring (31).
•
Remove the seal cover (09) to pull out the seal at the same time as the mechanical seal (08) and the lip seal
(88B).
•
Finally, gently remove the stationary part of the seal, which has remained housed inside the seal cover and
the lip seal.
Assembly
•
Mount the fixed part of the mechanical seal (08) and the O-ring (80) and the raccords (92) to the seal cover,
the quenching liquid pipes can be connected to the connections through the bearing support windows (09A).
•
Place the cover on the bearings support (06A).
•
Slide the rotary part of the seal (08) into the shaft complement (26).
•
Place the seal ring (31) on the shaft and fasten it with the pins (55) according to the A dimension showed in
chapter
8.6.2. Mechanical seal .
Tipo bomba A (mm)
KSF
– 20
12
KSF
– 25/30
16,5
KSF
– 40/50
23
KSF
– 60/80
25,5
ATTENTION
0
1
.6
1
1
.3
2
.0
0
1
0
0
1
.6
1
1
.3
2
.0
0
1
1