Installation
10
INOXPA S.A.U.
· 01.611.30.08EN · (0) 2020/02
Electrical equipment, terminals and components of the control systems may still carry current when
they are disconnected. Contacting them may impose a hazard to operators or cause irreparable
material damage.
Before handling the pump, make sure that the motor is stopped.
•
Connect the motor in accordance with the instructions supplied by the motor manufacturer, in accordance
with the current national legislation and in compliance with EN 60204-1.
•
Check the direction of rotation (see the signalling label on the pump).
•
Start and stop the pump motor momentarily. Make sure that the direction of rotation is correct. If the pump
rotates in the wrong direction it could cause serious damage.
ALWAYS check the direction of rotation of the motor with liquid inside the pump.
For models with a seal chamber, ALWAYS make sure that the chamber is full of fluid before checking
the direction of rotation.
ATTENTION
0
1
.6
1
1
.3
2
.0
0
0
6
