4. General Information
The C-TOP S is a control head that adapts to all of the INOXPA actuators to automate pneumatic
drive process valves. To automate the process valves, the control head can have up to three solenoid
valves.
The control head contains a linear detection electronic module comprised of several hall-effect
sensors. A PLC system sends signals to the solenoid valves of the control head through the unit’s
electronic module to control and operate the main valve. At the same time, the electronic module
sends feedback signals to the PLC to indicate the current position valve. A particular colour for each
valve position lights up to indicate its current status at all times.
The control head is set using the electronic module.
The control head main parts are:
4.1. DESCRIPTION
4.2. APPLICATION
The C-TOP S can install on any process valve (butterfly, ball, diaphragm and single or double seat
valves) of the food, beverage, chemical or pharmaceutical industry.
Cover screws
Cover seal
Cover
Base screws
Solenoid valves
Electronic module
Cable gland
Base
Target
Base seal
Pneumatic ports
10.426.32.0014
Información General
INOXPA S.A.U.
10.426.30.03EN · (0) 2022/01
8
