8.
Technical Specifications
8.1. MATERIALS
Plastic parts
PA6
Screws A2
Seals NBR
Air fittings
nickel-plated brass
8.2. ENVIRONMENT
Working temperature
C1 - protected areas
Storage temperature
-20ºC to 50ºC
Environment temperature
-5ºC to 50ºC
Degree of protection
IP65, IP67
8.3. CONTROL HEAD
Stroke
≤ 80 mm
Maximum shaft diameter
22 mm
Assembly type
screws
Fluid
filtered compressed air, filtration degree 40 µm lubricated
or not lubricated
Measuring principle
HALL sensor without contact
Measured quantity
position
Accuracy
± 0,8 mm
Visual indicators
LED
8.4. SOLENOID VALVES
Quantity
0 - 3
Type
3/2 way, normally closed with manual locking
Operating pressure
3 -7 bar
Operating voltage
24 V DC ±10%
Power consumed
0,35 W
8.5. COMUNICATION
Digital 24 V DC
AS-interface
Operatin voltage
24 V DC ± 10%
by wire AS-i de 29,5 to 31,6 V DC
Outlets
PNP normally open
-
Terminal
type push-in, nominal cable
section 0,2 a 1,5 mm
2
(22 AWG a
16 AWG)
type push-in, nominal cable sec-
tion 0,2 a 1,5 mm
2
(22 AWG a 16
AWG)
Main input
cable gland M16 x 1,5 (4 to 10 mm
diameter cable)
cable gland M16 x 1,5 with 2
m cable and M12 4 pole male
connector
External sensor input
M16 x 1,5 plug
M16 x 1,5 plug
Version
-
v 3.0 (A/B addressing and up to 62
nodes)
Slave profile
-
7A77
Especificaciones Técnicas
INOXPA S.A.U.
10.426.30.03EN · (0) 2022/01
18
