Inovonics INOmini 638 SiteStreamer, Инструкция по установке и эксплуатации

Страница: 18 / 22

— 33 —
for a specific ‘save to’ location. The file has a default name
of
638settings.ini.txt.
To upload a saved Hardware Profile to your SiteStreamer™,
first click:
Browse…
to locate the saved profile on your
computer, and then click:
Upload Hardware Profile
. This will
replace all setup parameters that are currently loaded and
running in your unit.
— 34 —
Section V
UPDATING THE SITESTREAMER™
The Firmware Updater
The Sitestreamer™ is host to two operating files that may be
updated easily by the user in the field. These files are the
primary firmware, which controls the functions, memories
and Web interface of the unit, and the individual Web pages
that comprise the Web interface screens.
The Sitestreamer™ includes a ‘bootloader’ utility that allows
firmware to be updated whenever Inovonics issues changes
to add features, to improve performance, or otherwise to
expand the usefulness of the product. Inovonics supplies
firmware updates free of any additional charges.
A bootloader is a simple software routine that runs on any
PC connected to the same network as the Sitestreamer™.
Refer to Page 15 for securing a connection between the
SiteStreamer™ and your computer. This must be a wired,
LAN connection for both the PC and for the Sitestreamer™.
Attempting to use a Wi-Fi link will almost always fail.
Warning
A firmware update will restore the SiteStreamer™ to factory
defaults. All settings and presets will be overwritten! Always
save a Hardware Profile (Page 32) before proceeding with an
update. This will retain all user setup parameters that can
be restored afterward.
Update Files
A firmware update will be supplied as a ‘zipped’ folder con-
taining a number of files. Make a temporary New Folder on
your PC Desktop and unzip these files to it as shown at the
top of the next page.