Inovonics FM SiteStreamer+ SOFIA 565, Инструкция по установке и эксплуатации, Страница: 11 / 40

— 9 —
Section II
INSTALLATION
GENERAL
This section of the manual addresses the physical installation
of the SOFIA 565 at its operating location, the ‘nuts and bolts’
of connecting the unit. This section also references pages
where pertinent setup adjustments are discussed.
Many users choose first to familiarize themselves with equip-
ment on the bench or at their desk, in which case they may
immediately turn to Section III that describes SOFIA 565 setup
and use. When the time comes, do please refer back to this sec-
tion to confirm proper physical installation and interconnection
with other station equipment.
Unpacking and
Inspection
As soon as the equipment is received, inspect carefully for any
shipping damage. If damage is found or suspected, notify the
carrier at once, and then contact Inovonics.
We suggest that you retain the original shipping carton and
packing materials for possible return or transshipment. If re-
turned for Warranty repair, shipping damage sustained due to
improper packing for return may invalidate the Warranty!
IT IS IMPORTANT to register the Warranty of your SOFIA 565.
This assures coverage of the equipment under Warranty terms,
provides a means of tracing lost or stolen gear, and adds the
user to a database to receive specific service instructions or
software/firmware updates when issued. Register online at:
www.inovonicsbroadcast.com/support/productRegistration
MOUNTING, POWER AND ENVIRONMENT
Rack
Requirement
The optional 1U rack-mount chassis will accommodate either
one or two half-rack Inovonics modules, or one half-rack and
one one-third-rack size in the INOmini™ series. Appropriate
blanking panels are provided with the rack-mount kit.
Heat Dissipation
Consuming little power, the SOFIA 565 generates negligible
heat itself, thus no noisy internal fan and bothersome filter.
The unit is specified for operation within an ambient tempera-
ture range between freezing and 120°F/50°C. Because adjacent
gear may radiate substantial heat, be sure that the equipment
rack is adequately ventilated to keep internal temperature be-
low the specified maximum ambient.