www.maxiclimber.com
5. ASSEMBLY
MaxiClimber® Sport can be assembled in minutes by only one person. Screws and nuts only need to be tighten with the wrench (part). When assembling the MaxiClimber® Sport follow these instructions:
(1)
Assemble the Large Front Tube (Part D) to the body (Part A), below the rear with the pedals.
Put the 2 screws (Part E) and tight them with the #5 Allen Wrench (Part H). See picture.
(2)
Take the Small Back Tube (Part C), and take from the Manual bag 2 screws, 2 nuts and 2 washers
for this part. See picture.
EN5
