Inova inovabed Sofa-WallBed, Инструкция по сборке, Страница: 6 / 37

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
Sofa-WallBed
| ASSEMBLY MANUAL
PLEASE NOTE: Your Bed may look different
than what is shown in the pictures and
Videos throughout this manual
TOOLS NEEDED:
Electric Power Drill
#2 Phillips Bit (provided)
#3 Phillips Bit (provided)
#2 Square Bit (provided)
4mm Allen Wrench
4mm Allen Bit (provided)
Pozi Drive Bit (provided)
T27 Torx Bit (provided)
1/2” Wrench
#2 Phillips Screwdriver
Hammer
Pliers
Utility Knife
Vise Grips
Masking Tape
Flashlight
Optional: Smart Phone with a
camera to scan video instruction
QR Codes
HARDWARE LIST:
Bolts:
H-068 Panel Bolts, 2”
H-112 Flange Head Bolts, 5/16” x 2”
H-162 Panel Bolts, 30mm
H-235 Hex Head, 5/16” x 2-3/4”
H-244 Button Head 1/4”-20 x 1/2”
H-417 Cap Screw 5/16”-18 x 1”
H-461 Panel Bolt, 3/4”
H-738 Flange Bolts 5/16” x 1-1/2”
Screws:
H-019 Machine Screws, 10-32 x 3/4”
H-016 Sheet Rock Screw 2-1/2”
H-065 Panel Screws, 50mm
H-073 Euro Screws, 5/16”
H-087 Pan Head Screws, 5/8”
H-088 Machine Screws, 1/4”-20 x 1/2”
H-107s Euro Screws, 13mm
H-115 Euro Screw, 18mm
H-491 Machine Screw, 3/4”
Nuts:
H-086 Flange Nuts, 5/16”
H-767 Nylock Nuts, 5/6”
Other:
H-003 Wood Dowels
H-011Minifix Pins
H-062 Double-Ended Minifix Pin
H-067 Washers, 3/4”OD x 5/16” ID
H-073 Pozi Euro Screws, 14mm
H-077 Wide Angle Brackets
H-085 Mending Plates
H-120 Roller Bearing
H-231 Type 2 Fix Connector
H-233 Door Bumper
H-285 Pivot Bracket
H-783 Mending Plate
Quick Start Guide