Inova inovabed Sofa-WallBed, Инструкция по сборке, Страница: 33 / 37

Step 16: Install the Seat Deck
The illustrations drawn are general representations of your product’s parts and hardware
.
A. Remove the seat cushions from the Seat Deck, then angle the Seat Deck Front Slider to be under the ledge of both arms as shown.
B. Then move the Slider toward the front, making the seat parallel with the front spreader (note: if the slider does not easily move underneath the arms, loosen the arm bolts slightly)
C. Attach the cheek plate linking bar to the front support using the hardware provided. Install the hardware in the exact order as depicted below
1) H-235 bolt 2).H-067 washer 3) cheek plate linking bar 4) H-120 roller bearings 5) H-767 nylock nut
Do Not over tighten the Nylock nut , make sure the bearings can still roll.
( Tip; it is easier to attach hardware if someone lowers the Bed slightly after the bolt is through the cheek plate linking bar. )
A. B.
C.
#1 H-235
Slider
#3 cheek plate linking bar #5 H-767
#2 H-067
#4 H-120
Seat Deck
Rear Supports
Enlarged view