Inova inovabed Sofa-WallBed, Инструкция по сборке, Страница: 5 / 37

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
Sofa-WallBed
| ASSEMBLY MANUAL
PLEASENOTE: Your Bed may look different
than what is shown in the pictures and
Videos through out this manual
ROOM READINESS
CHECKLIST
• Check room to confirm the ceiling, floor, and
walls in the room are finished and completed
• Select the wall and location in which the Bed
will be placed
• Measure the length of the wall and height of
ceiling to confirm the Bed will fit
• Locate any electrical outlets on the wall that
may be covered up by the Bed
• Clear out any items in the room so you have a
clear path to the wall and an open area to
assemble the Bed
• If the flooring is hard, lay down some furniture
blankets, sheets of cardboard, or other
cushioning material to prevent parts from being
scratched
• Locate the hardware box and open it.
Organize the hardware bags numerically and
alphabetically.
• Locate the mattress that will be used with this
Bed; the mattress is required for proper
adjustment of the Bed and completion of the
assembly and should be no thicker than 11”.
TIP: Depending on your unit, you may want to
remove existing baseboard that is located on the
wall where the Bed will be installed. By removing
the baseboard, it will allow for a tighter fit against
the wall (units may already have a notch for
baseboard – see shop drawings (if applicable)
Quick Start Guide