InoTec SCAMAX 2600, Руководство по обслуживанию

Страница: 36 / 68

SCAMAX
®
2600/4000
Tech. Manual 06/2002 T-36
3.7 Footswitch
The footswitch is used when thick, stapled or folded documents are to be scanned.
Turning the paper separation on and off can be done with the footswitch. The footswitch cable is plugged
into a socket at the back of the scanner. As long as the footswitch is depressed paper separation is
turned off and the ultrasound double-feed detector is deactivated. The separator rollers are lowered
(move away from the red bands of the initial feed roller), which allows passage of documents up to the
maximum paper thickness without changing the paper thickness selector.
3.8 Endorser
The endorser prints information like date, time, sequence number and so on, on the back of the
documents during the scan process.
The endorser unit has the following components:
Printhead complete
Photocell
Processor board
3.8.1 Printhead
The printhead is located beneath the top cover. It is mounted on a guide rod, which facilitates sideways
movement of the print unit.
The printhead and the processor board are connected via a 28-strand ribbon cable. A motor drives the
inkjet cartridge from the standby position, where the jets are covered, to the print position and vice versa.
Inkjet cartridges supported are:
CANON BC 01
PELIKAN Easy Click for BJ-10e/BJ-200