40
CPS 220/64/SV
Montage- und Betriebsanleitung
CPS 220/64/SV
Mounting and Operating Instructions
40
6.3.4.6. Zentrales Dimmen
Mit dem optionalen CLS-
Dimmer Modul können
entsprechend programmierte
Leuchten in den Stromkrei-
sen über
• Taster am CLS Dimmer
Modul
• einen extern
angeschlossenen Taster
• eine 0V-10V Steuerspannung
zentral gedimmt werden,
regelbar in 10%-Stufen von
0% (Leuchte aus) bis zu 100%
(Leuchte ein).
Damit sind die Leuchten der
Notbeleuchtung mit denen
der Allgemeinbeleuchtung
gemeinsam zu dimmen (z.B.
über ein EIB-Modul). Im Not-
betrieb schalten die Leuchten
automatisch auf 100%.
Technische Daten:
Temp.-Bereich:
-15°C ... +40°C
Gehäuse:
Thermoplast V0
Leiteranschluss:
2,5mm² eindrähtig
oder 1,5mm² Litze mit
Aderendhülse
Funkentstörung:
gem. DIN EN 55015
Schutzklasse:
I
Schutzart:
IP20
Funkentstörung:
gem. DIN EN 55015
6.3.5. Zusätzliche Komponenten
Zusätzliche Komponenten erweitern die Funktionalität
des CPS 220 / 64 – Systems.
6.3.5.1. RIF 5
Das RIF 5 ist werksseitig in die Geräte CPS 220/64 und
CPUS 220/20 eingebaut. Die Baugruppe stellt neben
potentialfreien Meldekontakten noch Anschlüsse für den
Fernschaltkreis und die Stromschleife zur Verfügung,
sowie dient sie zur Überwachung des Hauptverteilers und
der Batteriespannung.
An jedes CPS-Steuerteil kann max. ein aktives RIF 5
angeschlossen werden. Durch passive RIF 5
- Module lassen sich jedoch die Meldekontakte
vervielfältigen. Dazu ist die Moduladresse „0“ einzustellen
R T G
IBa
IBp
IBp
+24V
T
FS
SL
+
–
+
–
+24V
+
–
Opt.
Stoer
Potentiometer
0-10V
oder
0 - 10V
Taster
Taster ext.
+24V
Bus
CLS
-Dimmer
INO
TEC
850 013
T
T
EMC
: gem. EN 55015
Ta
: -15 bis 40°C
+ 0-10V
- 0-10V
59
17,5
90
6.3.4.6. Central dimming
The optional CLS dimmer module
allows programmed luminaires in
the circuits to be dimmed centrally
via
• Buttons on the CLS dimmer
module
• An externally connected button
• A 0V–10 V control voltage
This can be done variably in 10%
steps from 0% (luminaire off) up
to 100% (luminaire on).
Accordingly, the emergency ligh-
ting luminaires are to be dimmed
together with the general lighting
luminaires (e.g. via an EIB modu-
le). In emergency operation, the
luminaires switch to 100% automa-
tically.
Technical data:
Amb. temp.
range:
-15°C to +40°C
Housing:
Thermoplast V0
Conductor
connection:
2.5 mm² single-wire
or 1.5 mm² cord with
cable end sleeve
EMC protection:
as per DIN EN 55015
Protection class:
I
Protection
category:
IP20
EMC protection:
as per DIN EN 55015
6.3.5. Additional components
Additional components enhance the functionality of the
CPS 220/64 – system.
6.3.5.1. RIF 5
The RIF 5 is fitted into devices CPS 220/64 and CPUS
220/20 at delivery. The module provides volt-free signal-
ling contacts and connections to the remote switching
circuit and the current loops and also monitors the main
distribution board and the battery voltage.
A maximum of one active RIF 5 can be connected
to each CPS controller. However, the signalling
contacts can be reproduced manifold using
passive RIF 5 modules. This requires the module address
"0" to be set and the monitoring loop function (SLÜ) to be
Содержание CPS 220/20
Страница 2: ......
Страница 47: ...47 CPS 220 64 SV Montage und Betriebsanleitung CPS 220 64 SV Mounting and Operating Instructions BCS BCS...
Страница 107: ......