11
11.
Never carry passengers on the machine.
12.
At connecting the machine on the tractor put both support feet
into the working position (up). After removal put the support feet
into the standing position (down). Take care about the stability of
the machine when it is removed.
13.
Never overload the machine and the tractor. Use the ballast if
necessary.
14.
Start the machine only if all guards of the machine are fit on
proper places .
15.
It is forbidden to stand in the range of operating of the machine.
16.
Do not enter the working zone of the PTO shaft. It is dangerous to
approach the rotating parts of the machine.
17.
Keep a safety distance from drive parts outside of the machine
(PTO shaft, hydraulic pipes).
18.
Before leaving the tractor with the machine attached disconnect
the tractor, put the machine steadily on the ground (with the
hydraulic lift), apply the hand brake and if the ground is steeply
slooping, wedge the tractor.Take out the starting key.
19.
Do not enter the zone between the tractor and the machine. It is
strongly forbidden to be in this zone if the tractor is not properly
disconnected, hand brake applied and starting key taken out.
Attachment on the tractor and transport
1.
Before attaching the machine on or detaching it of the tractor be
sure that hydraulic lift system is in a neutral position.
2.
check that a category of 3-point linkage on the tractor
corresponds to that one on the machine.
Содержание MKM
Страница 33: ...33 Fig 33 Fig 34 Fig 37 Fig 38 1 Fig 34 6 Fig 35 Fig 36 Fig 38 2 5 9 4 10 7 8 3 1 2 ...
Страница 38: ...38 A ...
Страница 39: ...39 B ...