Innovative NV10 Скачать руководство пользователя страница 6

Страница: 6 / 39

GENERAL DESCRIPTION

V10 Validator - the next generation of Smiley® Bank Note validators

e figure 1), suitable

Figure 1

The NV10 and Universal Bezel PA231

he NV10 Validator leaves the factory containing at least one currency data set so that it

lications are being tested all the time, please refer to our web site or

The NV10 Bank Note Validator is a compact note-validating machine (se

for most money machines. It will accept up to 15 different denominations of notes in the seri

control mode, pulse mode and binary mode, 4 notes in parallel mode and will cope with

different designs of banknotes having the same value such as are found in the United

Kingdom.

is ready for immediate installation. If it is desired to change the currency data set this may

be done using either the NV10 to NV10 currency cloning system or the PC based Currency

Management software.

New currencies and app

contact the factory for information concerning specific currencies if they are not already

included on our approved list.

•

NV10 Operations Manual 6

Universal Bezel

PA231

Bezel Release Catch

Note Path Acces

DIP Switches

Buttons

User Interface

Display

Status LED’s

Содержание NV10








































Результаты поиска

Содержание NV10

Отзывы:

Бренды по названию

Популярные бренды

Innovative NV10, Руководство по эксплуатации

Результаты поиска

Содержание NV10

Отзывы:

Бренды по названию

Популярные бренды