Innovative NV10 страница 30 Скачать руководство пользователя

Страница: 30 / 39

1 SUPPORT TOOLS

are available for use with the NV10 Bank Note Validator:

logy Ltd website: www.innovative-

pport via [email protected]

omputer and then returned to the

1.1 PC PROGRAMMING SOFTWARE (ITL BANK NOTE VALIDATOR

er software offers the following functions:

ta via the DA1 or

set already loaded on an NV10 unit.

own

version of firmware onto the NV10.

(firmware version 3.15 and

rsonal Computer with Pentium™ processor or

1.2 VALIDATOR PROGRAMMING SYSTEM (DA3)

rogramming of ITL Bank Note

an:

tor to the latest versions using the BNV

are within a validator with pre-selected (Tagged) files

rom the Host machine.

Manual

1.3 INTERNET WEBSITE SUPPORT

des the means to download new and updated

1.4 E-MAIL SUPPORT

available over the Internet Innovative Technology supports an e-

The following support tools

•

ITL Bank Note Validator Currency Manager Software.

•

Validator Programming System (DA3)

•

Downloads from the Innovative Techno

technology.co.uk

•

E-mail Su

NOTE: The Validator must be in SSP mode when connected to a c

original Settings when complete

1
CURRENCY MANAGER)

The ITL BNV Currency Manag

•

Program the Validator by downloading pre-prepared currency da

DA2 kit.

•

Check the firmware version and currency

•

Adjust the channel and pulse configuration on a pre-programmed NV10 to your

requirements.

•

Download a new

•

Use diagnostic functions to check Validators operation

greater only).

The software will run on an IBM compatible Pe

equivalent (see Appendix F for operating system requirements) and requires a DA1 kit fitted

to the serial port or DA2 kit fitted to the USB port (see Appendix E).

The DA3 is a programming system designed to enable the p

Validators in the field without the use of a PC.

Once the DA3 has been programmed the user c

•

Update the existing software within a valida

Match Download function.

•

Overwrite the existing softw

using the BNV Override Download function.

•

Test the functionality of the validator away f

For full DA3 operation and functionality details please refer to the DA3 User

(Document number GA339)

The Innovative Technology Ltd website provi

currency sets and new versions of firmware for the NV10. You can obtain these along with

technical bulletins by visiting www.innovative-technology.co.uk.

If the data you require is not

mail system to help customers with unusual requirements. The address is:

[email protected]

NV10 Operations Manual

Содержание NV10








































Результаты поиска

Содержание NV10

Отзывы:

Похожие инструкции для NV10

Бренды по названию

Популярные бренды

Innovative NV10, Руководство по эксплуатации

Результаты поиска

Содержание NV10

Отзывы:

Похожие инструкции для NV10

Бренды по названию

Популярные бренды