Innovative Technology NV200 Spectral Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 120

background image

NV200 Family User Manual

<< Back to Contents

Copyright © Innovative Technology Ltd 2016

Doc: NV200 Family Manual

Version: 1.0

Page 5 of 119

1

DOCUMENT INTRODUCTION

1.1

Related Documents

This document should be read together with the following documents:

For SSP/eSSP:

Protocol Manual

–

SSP (GA138): SSP Interface Protocol Specification for integration

eSSP Implementation Guide (GA973): Information for programmers and integrators

CC2 Manual (GA00863): CC2 Interface Protocol Specification for integration

For Software:

Software Manual

–

GA02037 Software Guide

1.2

Manual Amendments

Rev.

Date

Amendment Details

Issued by

1.0

01/09/2017

First Issue

JB

1.3

Copyright

This manual set is Copyright © Innovative Technology Ltd. 2016. No part of this

publication may be reproduced in any form or by any means used to make any
derivative such as translation, transformation or adaptation without permission from
Innovative Technology Ltd. The contents of this manual set may be subject to
change without prior notice.

1.4

Limited Warranty

Innovative Technology Ltd warrants each of its hardware products to be free from
defects in workmanship and materials under normal use and service for a period

commencing on the date of purchase from Innovative Technology Ltd or its
Authorized Reseller, and extending for the length of time stipulated by Innovative
Technology Ltd.
A list of Innovative Technology Ltd offices can be found in every section of this
manual set. If the product proves defective within the applicable warranty period,
Innovative Technology Ltd will repair or replace the product. Innovative Technology
Ltd shall have the sole discretion whether to repair or replace, and any replacement
product supplied may be new or reconditioned.
The foregoing warranties and remedies are exclusive and are in lieu of all other
warranties, expressed or implied, either in fact or by operation of law, statutory or

otherwise, including warranties of merchantability and fitness for a particular
purpose.
Innovative Technolog

y Ltd shall not be liable under this warranty if it’s testing and

examination disclose that the alleged defect in the product does not exist or was
caused by the customer's or any third person's misuse, neglect, improper installation
or testing, unauthorized attempts to repair, or any other cause beyond the range of
the intended use. In no event, will Innovative Technology Ltd be liable for any

damages, including loss of profits, cost of cover or other incidental, consequential or

«
...
4
5
6
7
8
...
»

Содержание NV200 Spectral

























































































































Отзывы:

Нет отзывов

Похожие инструкции для NV200 Spectral

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды