11
5. Press the PROGRAM button again to set the current track.
. “P- 2” is displayed.
Repeat steps 4 thru 5 to program the additional tracks.
. When the selection of track numbers has been finished, press the P A
button
to start
program playback.
. o cancel the program mode, press
OP
.
o check the programmed order
In the stop mode, press
or
repeatedly to show the track numbers that have
been programmed.
o add a track to the end of the programmed order
In the stop mode, press the PROGRAM button.
elect a track number by pressing
or
, then press the PROGRAM button.
he current track will be added to the end of the program.
o delete the last track from the programmed order
In the stop mode, press the C
AR button to delete the last track from the program.
o clear the programmed order
Press
OP when the CD is already stopped, or press OP N/C O
, AM/FM, PHONO, or AUX
Listening to t e Radio
1. Press the “AM/FM” button 1 .
Press again to switch between AM and FM
2.
une to the desired station
using the Radio uner
nob 2 .
Note:
In FM mode, the "TUNED ST" indicator
lights up red when a stereo station is correctly
tuned in.
Adjusting for Best Reception
AM broadcast: Rotate the unit to find the best position.
FM broadcast: Extend and reposition the FM antenna.
Listening to an External Audio Device AUX Mode
In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player,
Portable CD Player, etc.)
There are two AUX IN jacks (front and rear). When connecting a device that has a headphone jack,
use the cable with 3.5mm plugs on either end with the front AUX IN jack. The rear set of AUX IN
jacks (red and white) can be used with devices that use RCA connections (DVD players, etc.).
1. Plug one end of the AUX IN cable included into the AUX IN on the front or back of the unit .
2. Plug the other end of the cable into the headphone jack or RCA jacks of the external audio
source.
