9
TRANSMITTING SIGNALS
Sound from your tablet will be transmitted through the FM Transmitter/Cigarette Adapter to your wireless
headphones.
Note:
Your car’s FM radio does not need to be turned on in order for the headphones to function.
To power the FM Transmitter/Cigarette Adapter
Insert the Cigarette Adapter power plug into your in-‐car 12V/cigarette socket.
Connecting your tablet
Insert the Audio-‐In plug into the earphone or line out 3.5mm jack on your tablet.
To maintain good performance, always keep the audio cable uncoiled and fully extended.
Selecting the channel
There are 4 channels available on your FM transmitter: FM 88.1MHz, 88.7MHz, 106.7MHz and 107.5MHz.
Set the FM frequency selector to the proper channel position required.
NOTE
: Select the channel with the least static and clearest sound.
Charging your tablet
Your tablet can be charged via the USB port on the Cigarette Adapter. Use your tablet’s USB charging cable
(not included) to plug your tablet into the Cigarette Adapter’s USB charging port.
NOTE:
•
The operation distance between the signal transmitter (Cigarette Adapter) and the receiver is 16.4 feet.
Move closer to the signal transmitter when you feel the sound is not clear.
•
If you hear no sound, check if the volume on the receiver is turned down too low, or set the receiver to
search for the correct channel.
USING THE WIRELESS HEADPHONES
Each pair of headphones are powered by 2 x AAA batteries (not included). Replace the batteries when you
find the sound to be strange or distorted.
•
Unclip the battery cover. Insert 2 x AAA size batteries (not included) according to the correct polarity.
Replace the battery cover.
•
To turn the headphones on or off, set the Power switch to the appropriate position. When the
headphones are on, the power indicator will light up.
•
Put on your headphones. Adjust the headband length so that the headphones fit snugly.
•
Adjust the volume with the Volume control.
NOTE:
Excessive sound may damage your hearing.
•
Press and hold the Scan button to search for the correct channel from the Cigarette Adapter.
NOTE:
The headphones may also receive some radio stations.
NOTES:
•
The operation distance between the signal transmitter (Cigarette Adapter) and the receiver
(headphones) is 16.4 feet. Move closer to the signal transmitter when you feel the sound is not clear.
•
If you hear no sound, please check the volume is turned up, or press and hold the Scan button again to
search for the correct channel.
•
If the headphones do not work properly, switch them off and then on, and re-‐connect the transmitter.
Содержание ITIP-444
Страница 13: ...13 444120500E...
