background image

   

   

10   

   

Using   your   wireless   headphones   as   wired   headphones   

   

You   can   also   use   the   headphones   as   a   wired   unit   with   an   3.5mm   auxiliary   cable   (not   included).   Your   headphones   will   

then   receive   signals   from   your   tablet   directly.   

   

 

Insert   the   3.5mm   plug   of   the   auxiliary   cable   into   the   audio-­‐in   socket   on   the   headphones.       

 

Next,   insert   the   other   end   of   the   cable   into   the   3.5mm   earphone   or   line-­‐out   jack   of   your   tablet.   

 

Put   on   your   headphones.   Adjust   the   length   of   headband   so   that   the   headphones   will   fit   snugly.   

 

Before   you   put   on   your   headphones,   reduce   the   volume   level   of   your   external   tablet.

   

NOTE:

       

 

When    the    auxiliary    cable    is    plugged    into    the    audio-­‐in    socket    of    the    headphones,    the    headphones    will   

automatically   cut   the   signal   from   the   transmitter.   

 

Excessive   sound   may   damage   your   hearing.   

   

SPECIFICATIONS   

TABLET   MOUNT   

   

Compatible   tablet   dimensions:   

(width   x   height   x   depth)   

Minimum:   8.66in   x   6.29in   x   0.35in   

Maximum:   10.629in   x   7.874in   x   0.55in   

   

   

12V   VEHICLE/CIGARETTE   ADAPTER   

   

Power   supply:   

12Vdc   

Power   consumption:   

1W   

15W   when   it   is   charging   

FM   frequency   channels:   

88.1MHz,   88.7MHz,   106.7MHz   and   107.5MHz   

S/N   ratio:   

45dB   

Operation   range:   

16.4   feet   in   open   area   

   

   

WIRELESS   HEADPHONES   

   

Power   supply:   

2   x   AAA   size   batteries   (not   included)   

FM   frequency   channels:

   

87.5MHz   to   108.1MHz   

   

TROUBLESHOOTING   

Problem   

Possible   Cause   

Solution   

No   batteries   or   batteries   have   died.   

Fit   new   batteries   into   the   headphones.   

The   headphones   may   be   turned   off.   

Turn   the   headphones   on   with   the   

Power   switch.   

Volume   control   may   be   turned   down   

(to   minimum).   

Adjust   the   volume   control.   

Headphones   are   not   

working   and/or   no   

sound.   

You   may   be   out   of   the   operating   range   

of   the   transmitter.   

Move   closer   to   the   transmitter   to   keep   

the   distance   within   16.4   feet.   

The   connection   of   the   transmitter   and   

the   tablet   may   be   loose.   

Check   the   connection   of   the   

transmitter   and   the   tablet.   

No   reception.   

The   channel   being   used   on   the   

transmitter   and   the   receiver   do   not   

match.   

Press   and   hold   the   Scan   button   on   the   

headphones   to   search   for   the   correct   

channel.   

There   is   an   interfering   appliance   being   

used   nearby.   

Turn   off   the   interfering   appliance.   

Sound   is   not   very   

clear.   

Poor   reception.   

Change   to   another   channel.   

   

Содержание ITIP-444














Отзывы: