2
Precautions
This kit comprises Servo Commander 32 and the attached CD-ROM contains instructions for use
and functions. Please refer to these for optimal effects.
The input voltage to the Servo Commander 32 must correspond to the voltage rating of the servo.
Servos provided in this kit are rated 4.8-6V
; over or under voltage may cause unpredictable results,
even burnout of the motor. Make absolutely sure of the correct voltage before connecting the power
supply.
The kit provides a total of 18 servos. When operated simultaneously, they consume a large current;
make sure the power supply or battery connecting to Servo Commander 32 is capable of providing
10A of current
, so as to properly operate the kit. Insufficient current may cause unexpected results
and damage of the kit.
When using a battery power supply to the module, the voltage may lower after some while of
operation and cause abnormal actions of the kit. In such case, remove and fully charge the battery
before using again. If prolonged testing and operation is required, we suggest you use a power
supply unit to ensure uniform performance.
Prior to assembling the kit, install InnoBASIC Workshop as per the content of the CD; also make sure
that the PC communicates with Servo Commander 32 via a USB Line connection, so that the entire
assembly can be accomplished.
