Innovatech Terminator T-2100XME, Инструкция по эксплуатации

Страница: 5 / 68

Page 5 Terminator T-2100XME Manual
Important Safety Instructions
WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
Safety Instructions for All Tools
• KEEP GUARDS IN PLACE and in working order.
• REMOVE ADJUSTING TOOLS AND WRENCHES. Form
habit of checking to see that keys and adjusting wrenches
are removed from the Terminator
®
before turning on.
• KEEP WORK AREA CLEAN.
Cluttered areas invite acci-
dents.
• KEEP CHILDREN AWAY. All visitors should be kept a safe
distance from the work area.
• WEAR PROPER APPAREL. No loose clothing, gloves,
neckties, rings, bracelets or other jewelry to get caught in
moving parts. Non-slip footwear is recommended. Wear
protective hair covering to contain long hair.
• ALWAYS WEAR SAFETY GLASSES.
Also use a face or
dust mask if operating in a dusty environment. All users and
bystanders must wear eye protection that conforms to ANSI
Z87.1. (CAN/CSA Z94.3)
• MAINTAIN EQUIPMENT WITH CARE. Keep equipment
clean for best and safest performance. Follow instructions
for lubrication and changing accessories.
• DISCONNECT BATTERY
before servicing.
• REDUCE THE RISK OF UNINTENTIONAL STARTING.
Make sure handles are centered and foot pedal is not de-
pressed before starting.
• USE RECOMMENDED ACCESSORIES. Consult the in-
struction manual for recommended accessories. The use of
improper accessories may cause risk of injury to persons.
• NEVER STAND ON TOOL. Serious injury could occur if the
machine is tipped or rocked.
• CHECK DAMAGED PARTS. Before further use of the
equipment, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly
and perform its intended function—check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its op-
eration. A guard or other part that is damaged should be
properly repaired or replaced. Do not use tool if switch does
not turn it on and off.
• NEVER LEAVE EQUIPMENT RUNNING UNATTENDED.
TURN POWER OFF. Don’t leave equipment until it comes
to a complete stop.
• DO NOT OPERATE ELECTRIC TOOLS NEAR FLAM-
MABLE LIQUIDS OR GASSES OR EXPLOSIVE ATMO-
SPHERES.
Motors in these tools may spark and ignite
fumes.