Innovatech Terminator T-2100XME, Инструкция по эксплуатации

Страница: 10 / 68

Page 10 Innovatech Products & Equipment Co.
Uncrating The Terminator
®
And Preparing It For
Operation
When you receive the Terminator
®
, inspect the outside of the
crate completely, to detect damage to the crate itself. If it is
damaged, notify the carrier immediately and follow his/her
instructions to file a claim.
Carefully uncrate the machine and inspect it for damage that
may have occurred during shipping. If the shipment is dam-
aged, notify the carrier immediately and file a claim in the
normal manner.
Check packing slip for complete shipment. If shipment is
incomplete, notify our Customer Service Department within 24
hours.
Remove the crate debris, set aside the blades and other pack-
ages, and prepare the Terminator
®
for operation:
Raise the hood. Inspect batteries for damage during shipment.
DO NOT MOVE THE TERMINATOR
®
MACHINE WITH THE
LID OPEN!
To remove the TERMINATOR
®
from crate:
1) Plug the battery connectors together.
2) Take 2 x 4’s off the edge of the crate and between the wheels.
3) Place 2 x 4’s behind the crate of the rear of the machine.
4) Make a ramp with the 2 x 4’s and the crate material.
5) To enable power to the TERMINATOR
®
, turn the key, pull up
on red knob.
6) Depress foot pedal to start motor. Lift front wheel off of the
crate 5 inches by pulling back on the valve handle. (Front blade
holder will be on crate).
7) Pull back the left and right handles evenly and depress the
foot pedal slowly. The machine will start moving slowly back-
wards.
8) Ensure that both rear wheels come off the crate evenly. Fail-
ure to back off evenly could result in the machine tipping over
and harm to the operator.
9) As machine moves back, ensure that the center wheel clears
the crate. If center wheel does not clear the crate, depress
the center handle while pressing the foot pedal until the wheel
clears the crate.
10) Once machine is on the ramp, slide all the way to the bot-
tom, then lift jaw up and set center wheel down to the ground.
11) Whenever mounting or dismounting the TERMINATOR
®
,
ALWAYS disable the power by pressing down on the red power
knob.