5.
Launch
LM Programmer.
The LM Programmer application can be
launched from
Start->Programs->LogWorks3->LM Programmer
from
the Windows task bar.
Once you have completed your desired changes, press the
Program
button
on the lower right on the software application. You will know that the DLG-1
has been programmed successfully when the
Program
button grays out.
3.2
Display Settings (Gauge Abbreviations)
1.
Wideband O2 Units (WB O2 Units)
– Allows the gauge to display
O2 units in either AFR or Lambda. Default setting is AFR.
Note: In LM Programmer you can also setup the display to show
percentage of Oxygen. Once the measurements are leaner than 7
lambda unit will automatically switch to percentage of O2
2.
Fuel Type –
Change to different fuel types when DLG-1 is setup to
display in AFR. Default setting is Gasoline.
Logworks 3 & LM Programmer Software Package
4
The DLG-1 can be connected directly to your Windows computer to log and
analyze data with the Logworks software or to configure with LM
Programmer. The software is a free download on the Innovate Motorsports’
support section of the website.
4.
1
LM Programmer
LM Programmer is used to configure settings on your DLG-1.
1.
Connect the OUT port of the DLG-1 to the provided serial
programming cable. Connect the other end of the serial
programming cable to your computer. If your computer does not
have a serial port, you can purchase a USB to Serial adapter from
