Innovate 9500, Инструкция по установке и эксплуатации

Страница: 20 / 22

20 of 22 496332 Issue 1
-LkSt tamper #### Violation of lock set tamper ####
Entry by FE #### Entry via final exit door ####
Entry by RKP #### Entry at RKP
DKnock cct -#### Violation of double knock circuit #### (not an alarm
event)
Tamper RKP #### Violation of rkp ### back tamper, or excess
presses at RKP
Alarm ####
Tamper ####
Alarm #### (test) Circuit violation of circuit #### currently under test
-R-RKP-tamper-#### Restore RKP ### back tamper
OPR ## deleted Operator deleted from system
Duress deleted Duress code deleted from system
MGR ## deleted Manager deleted from system (not applicable to
Manager 1)
Specific LIM ### Walk test of a LIM ### (engineer walk test)
Entry alarm keys Entry alarm following entry initiated at panel keypad
Part Set System part set
Omit 24hr grp ## Omission of 24 hour groups
Access manager ##
Tamper branch # Failure of branch communications or branch
wiring fault
Alarm entry #### Entry alarm following entry at final entry circuit ####
Invalid log code Invalid entry found in log
Open Return from full set status
Day Return from part set status
Close System set
B#L=$$ B$ L=$$ Log of LIMs found on each branch (eg B1 L=10 B2
L=7)
OPR ## changed Operator code changed
Duress changed Duress code changed
MGR ## changed Manager code changed
ENG code changed Engineer code changed
LIM ### No reply LIM failed to make a valid response on three
attempts
9500 Log Events 9500