Innovate Technology NV10, Руководство по эксплуатации

Страница: 24 / 39

NV10 Operations Manual – GA333-3
24 of 38
© Copyright Innovative Technology Limited 2005
9: Mechanical Installation
The NV10 validator is supplied with the Universal Bezel-PA231 (see figure 9).
9.1: Changing or removing the bezels:
•
Push the red Bezel Release Catch in the centre and top of the NV10.
•
The bezel can then be unhooked from the 4 locating points on the NV10.
•
To refit, hook the bezel onto the bottom 2 locating points and then lift to fit onto the
top 2 locating points on the NV10.
•
The bezel will ‘click’ home into NV10 when fitted correctly.
9.2: Fitting the bezel into a machine
Figure 9 – Bezel and NV10 Installation
•
Remove the 4 nuts, 2 metal clamps, star washers and 2 bolts from each side of the
bezel as above (see figure 9).
•
Place PA231 through the aperture in the door of the machine from the front.
•
Fit the two metal clamps and star washers and tighten the nuts onto the bolts
(recommended torque 25cN per metre).
•
Fit the main bezel assembly onto the bolts with the black part to the top. Fit the star
washers and tighten the nuts onto the bolts (recommended torque 25cN per metre).
Caution
•
Ensure there is a clearance around the initial exit (see drg GA310 in Appendix A ) so
there is no obstruction to the banknotes as they are being read by the NV10.
•
A suitable cash box is needed so that the notes securely store away from the note exit
(see Appendix C ), to prevent notes accumulating at the note exit.
•
The cash box should form a physical barrier between the initial exit and the note exit.
Note Path
Access Buttons
Locking Nuts
And Bolts
Universal Bezel
PA231
Clamps
Bezel Release
Catch