Copyright InnovaPrep LLC
www.innovaprep.com 14
C
OLLECTING A
S
AMPLE
The unit is controlled with a single rotary switch as shown in Figure
4.15. The selections are Power OFF, Triggered, Continuous, and three
run modes:
•
Continuous mode
•
1 minute on, 1 minute off
—
sample
collection at 200 Lpm.
•
5 minutes on, 15 minutes off
—
sample
collection at 200 Lpm.
•
Extended Run
—
this selection samples
for 1 minute on and 5 minutes off with
sample collection at 100 Lpm.
Five status lights are used to signal the system
’
s status and to alert the
user to errors. A check status push-button switch can be used to turn
the status lights on momentarily so the device is not readily seen in dark
conditions (i.e. under “light discipline” conditions).
A Trigger accessory is required to operate the Bobcat
in the “Triggered”
mode. The Trigger (Item # AC08078) is a 22ft cabled switch available for
models purchased after February 2018. For models purchased prior to
February 2018, please contact InnovaPrep for more information.
E
LUTING A
F
ILTER
S
AMPLE
The AirPrep Filter and Elution Kit contains everything needed to recover
the organisms and particles from the filter. The kit includes a filter,
sample cup, elutor cap, and elution foam canister as shown in Figure
4.16.
FIGURE 4.15
MODE
SELECTION KNOB
