Copyright InnovaPrep LLC
www.innovaprep.com 12
FIGURE 4.5
POWER AND TRIGGER
CONNECTOR
FIGURE 4.6
EXTERNAL POWER SUPPLY
WITH BARREL PLUG
FIGURE 4.7
AC POWER CORD
Power and Trigger Port on the front of the unit. It will automatically
lock into place. Push the barrel plug on the external power supply (see
Figure 4.6) into the barrel jack on the Power and Trigger Connector. Plug
one end of the AC Power Cord (Figure 4.7) into the External Power
Supply and plug the other end into an appropriate wall outlet.
O
PTIONAL
B
ATTERY
O
PERATION
The ACD-200 has a rechargeable battery for operating the unit in the
field. The battery door is located on the
bottom of the unit.
The battery cover is
removed by pinching the retaining clips
on both sides, as shown in Figure 4.9,
and pulling the cover straight out of the
bottom of the unit, as shown in Figure
4.10.
The battery is installed into the unit with
the battery socket towards the front of
the unit as shown in Figure 4.11.
Reinstall the battery cover by pushing it into the bottom of the unit until
both clips click into place.
FIGURE 4.8
BATTERY COVER ON
THE BOTTOM OF THE UNIT
