Copyright InnovaPrep LLC
www.innovaprep.com 11
FIGURE 4.1
LOCKING PUSH PIN
LOCATION AT LEG HINGE
FIGURE 4.2
UNLOCKING AND
UNFOLDING LEG
FIGURE 4.3
LEG PUSH PIN
LOCKED IN PLACE
FIGURE 4.4
OPENING LEG LATCH
FOR ADJUSTMENT
4
P
ROCEDURES
Setting Up the ACD-200 Bobcat for Collection
Select the desired area for sample collection. For each leg, push the
locking push pin located on the leg hinge at the base of the Bobcat as
shown in Figure 4.1 and 4.2. It should be noted that the Bobcat cannot
be operated with the legs in the upright position since the exhaust vents
are located on the bottom of the unit and the Inlet
can’t be opened.
Unfold the leg until the push pin pops out and locks the leg into place as
shown in Figure 4.3. Open the leg latches, as shown in Figure 4.4, and
telescope the legs out to the desired height.
Supporting the back of the unit with one hand, push the 10-Pin
Connector (see Figure 4.5) on the Power and Trigger Connector into the
