Innova 31603, Руководство пользователя

Страница: 81 / 104

Additional Tests
ADJUSTMENTS AND SETTINGS
OBD2 79
„ If you entered a “Generic” DTC
(DTCs that start with “P0”, “P2” and
some “P3”):
- The selected DTC and DTC
definition (if available) show on the
Scan Tool’s display.
If a definition for the DTC you
entered is not available, an advisory
message shows on the Scan Tool’s
display.
„
If you entered a “Manufacturer-Specific” DTC (DTCs that start
with “P1” and some “P3”):
- The “Select Manufacturer” screen
displays.
- Use the UP and DOWN
buttons, as necessary, to highlight
the appropriate manufacturer,
then press the
ENTER button
to display the correct DTC for your
vehicle.
If a definition for the DTC you
entered is not available, an
advisory message shows on the
Scan Tool’s display.
4. If you wish to view definitions for
additional DTCs, press the
ENTER
button to return to the Enter DTC screen,
and repeat steps 2 and 3.
5. When all desired DTCs have been viewed, press the button
to exit the DTC Library.
Viewing the Firmware Version
1. Use the UP and DOWN
buttons, as necessary, to highlight
Firmware Version in the Menu , then
press the ENTER button.
„
The Firmware Version screen displays.
„ The screen shows the Scan Tool’s
current firmware version.
2. Press the ENTER button to return to
the Menu .