Innova 31603, Руководство пользователя

Страница: 47 / 104

Using the Scan Tool
VIEWING ENHANCED DTCs
OBD2 45
„ The Diagnostic Trouble Code (DTC) and related code definition
are shown in the lower section of the LCD display.
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the
and buttons, as necessary, to view the
additional information.
„ The Scan Tool will display a code
only if codes are present in the
vehicle’s computer memory. If no
codes are present, a “No Enhanced
DTC’s are presently stored in the
vehicle’s computer” is displayed.
Press the
button to return to
the GM Enhanced menu.
3. If more than one code was retrieved press the button, as
necessary, to display additional codes one at a time.
„ Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the
POWER/LINK button again.
4. When the last retrieved DTC has been displayed and the
button is pressed, the Scan Tool returns to the GM/Isuzu Enhanced
menu.
„ To view additional enhanced DTCs, repeat steps 1 through 4 ,
above.
„ To exit the enhanced mode, press the button. The Scan
Tool returns to the DTC screen.
Honda/Acura Enhanced DTCs
When the Scan Tool enters the “enhanced”
mode (and
Honda/Acura is selected, if
prompted), the Honda Acura Enhanced menu
displays. Depending on the protocol used to
communicate with your vehicle, the
Honda/Acura Enhanced menu provides
options to view:
„ Confirmed DTCs or Temporary DTCs
„ Confirmed DTCs or Pending DTCs
1. Use the UP and DOWN
buttons, as necessary, to highlight the
desired option, then press the
ENTER
button.