Innova 31603, Руководство пользователя

Страница: 64 / 104

Live Data Mode
VIEWING LIVE DATA
62 OBD2
The OBD2 Scan Tool is a special diagnostic tool that communicates
with the vehicle's computer. The Scan Tool lets you view and/or
"capture" (record) "real-time" Live Data. This information includes values
(volts, rpm, temperature, speed etc.) and system status information
(open loop, closed loop, fuel system status, etc.) generated by the
various vehicle sensors, switches and actuators.
In effect the Scan Tool lets you view, in "real time", the same signal
values generated by the sensors, actuators, switches and/or vehicle
system status information used by the vehicle's computer when
calculating and conducting system adjustments and corrections.
The real time (Live Data) vehicle operating information (values/status)
that the computer supplies to the Scan Tool for each sensor, actuator,
switch, etc. is called Parameter Identification (PID) Data.
Each PID (sensor, actuator switch, status, etc.) has a set of operating
characteristics and features (parameters) that serve to identify it. The
Scan Tool displays this information for each sensor, actuator, switch or
status that is supported by the vehicle under test.
WARNING : If the vehicle must be driven in order to perform a
troubleshooting procedure, ALWAYS have a second person
help you. One person should drive the vehicle while the other
person observes the Scan Tool data. Trying to drive and
operate the Scan Tool at the same time is dangerous, and
could cause a serious traffic accident.
VIEWING LIVE DATA
1. While linked to the vehicle, start the
engine, then press and release the
button.
„ The “Mode Selection Menu” displays.
2. Use the UP and DOWN
buttons, as necessary, to highlight Live
Data , then press the ENTER button.
„
The “Live Data” menu displays.
3. Use the UP and DOWN
buttons, as necessary, to highlight View
Live Data , then press the ENTER
button.
4. Real-time Live Data (PID) information
supported by the vehicle under test
displays.
Remember, what you are viewing is
"real-time" Live Data. The values
(volts, rpm, temperature, vehicle
speed, system status etc) for the
various PIDS displayed may change
as the vehicle's operating conditions change.