Innova 31603, Руководство пользователя

Страница: 53 / 104

Using the Scan Tool
VIEWING SRS DTCs
OBD2 51
„
If the erase was successful, a
confirmation message shows on the
LCD display. Press the
POWER/
LINK button to re-link the
Scan Tool to the vehicle.
„
If the erase was not successful, an
advisory message shows on the LCD
display. Verify that the Scan Tool is
properly connected to the vehicle’s
DLC and that the ignition is on, then
repeat steps 2 and 3, above.
Erasing ABS DTCs does not fix the
problem(s) that caused the code(s)
to be set. If proper repairs to
correct the problem(s) that caused
the code(s) to be set are not made, the code(s) will appear
again as soon as the vehicle is driven long enough for the
problem to recur.
VIEWING SRS DTCs
Refer to Vehicle Applications - SRS on page 91 for vehicles
covered.
Reading SRS DTCs
1. The screen shown when SRS DTCs is selected from the Enhanced
Main Menu (and the appropriate vehicle manufacturer is selected, if
prompted) depends on the vehicle make.
„ For GM/Isuzu vehicles ONLY: The
GM/Isuzu ABS Menu displays. Use the
UP and DOWN buttons, as
necessary, to highlight the desired
option,
Current DTC or History DTC ,
then press the ENTER button.
Proceed to step 2.
„
For Chrysler/Jeep, Ford/Mazda, Honda/Acura and Toyota/
Lexus vehicles:
Proceed to step 2.
2. A "One moment please" message
displays while the Scan Tool retrieves
the selected DTCs.
„
If the Scan Tool fails to link to the
vehicle’s computer, a "Linking
Failed" message shows on the Scan
Tool’s display.
- Verify the ignition is ON, then press the POWER/LINK
button to continue.