Innova 3100i, Краткое руководство пользователя, Страница: 3 / 16

12 1
This guide contains abbreviated “Quick Reference” procedures for the
diagnostic tool. Please visit www.innova.com to download a copy of
the complete Owner’s Manual.
Retrieve Codes
„
Connect the diagnostic tool to the vehicle’s test connector.
„
Turn the ignition key "On.” DO NOT start the engine.
„
The diagnostic tool will automatically link to the vehicle’s computer.
View Results
„
The diagnostic tool retrieves stored codes, Freeze
Frame data and System Status.
„
Codes, I/M Monitor Status and Freeze Frame data are
displayed on the Diagnostic Tool’s display screen. System
Status is indicated by LED indicators.
„
If more than one DTC was retrieved, press and release
the
DTC button, as necessary. To view Freeze Frame
Data (if available), press the FF button. ABS DTC’s (if
available) can be viewed by pressing the ABS button.
„
In the case of long code definitions, or when viewing
Freeze Frame Data, use the
UP and DOWN
buttons, as necessary, to view the additional information.
„
To view OEM Enhanced DTCs (if available), press the M
button; the Main Menu displays. The OEM Enhanced
mode provides the ability to retrieve OEM enhanced DTC,
from most Chrysler/Jeep, Ford/Mazda, GM/Isuzu,
Honda/Acura and Toyota/Lexus vehicles.
View Vehicle Information
„
While linked to a vehicle, press the M button. The Main
Menu displays. Use the UP and DOWN buttons,
as necessary, to highlight Vehicle Info , then press the
ENTER
button.
„
You can use the diagnostic tool to view vehicle
information stored in your vehicle's on-board computer.
Access Reference Information
„
From the Main Menu, highlight DLC Locator , then press
the ENTER button to access the DLC Locator. The
DLC Locator lets you find the location of the Data Link
Connector (DLC) for a specified vehicle.
„
From the Main Menu, highlight Tool Library , then press
the ENTER button to display the Tool Library Menu.
From the Tool Library Menu you can access a library of
OBD2 DTC definitions, or view definitions and
descriptions of the
I/M MONITOR STATUS icons and
SYSTEM STATUS LEDs.