Innotech LIFELINE-KIT, Инструкция по эксплуатации

Страница: 9 / 33

9
EN
LIFELINE KIT / 180212 / www.innotech.at
5
INTENDED
USE
6
INSPECTION
6.1 TO BE CHECKED BEFORE EACH USE
INNOTECH "LIFELINE-KIT" consists of non-rusting 8 mm stainless steel cable.
The stainless steel cable is supported by two end attachments.
OPTIONAL : INNOTECH "LIFELINE-KIT" with corner elements and intermediate
pass-over brackets.
If there is doubt about the safe functioning of the fall ptotection
system, do NOT use it any more, and have it inspected by a
specialist (written documentation).
If necessary, replace the product.
DANGER TO LIFE through damage/defects on the
INNOTECH "LIFELINE-KIT".
- INNOTECH "LIFELINE-KIT" must be in perfect working condition.
- Inspect cable loop(s) (Ø approx. 220 mm) and spring pre-tension in
the end connections (cable pre-tension).
- Check the safety harness, lanyard, and anchorage points as specified
in the applicable instruction manual.
- Do not use INNOTECH "LIFELINE-KIT" any longer, if:
• Damage or wear to its components are obvious.
• other defects were identified (loose connections, deformations,
corrosion, wear, defective roof sealing).
• strain has occurred due to a fall (Exception: First aid help).
• it is not possible to read the product labelling.
!
DANGER
Prior to each use, INNOTECH "LIFELINE-KIT" must be checked visually for any obvious
defects.
Check the entire fall protection system's suitability for use by using the acceptance
protocol and test protocol.
DANGER TO LIFE from incorrect use.
- Use carabiners which comply with EN 362 to attach to the INNOTECH
"LIFELINE-KIT".
- If the cable system is mounted at a cant greater than 15°, use is
permitted ONLY with INNOTECH "VERT-GLEIT" as per EN 353-1/795 C.
Intermediate brackets and corner elements must not be traversed in the
engaged status using the INNOTECH "VERT-GLEIT".
!
DANGER