background image

5

EN

LIFELINE KIT / 180212 / www.innotech.at

3

SAFETY INSTRUCTIONS

If uncertainties arise during installation, it is imperative that you contact the 
manufacturer (www.innotech.at).

3.2

FOR SAFE ASSEMBLY

3.3

FOR SAFE USE

 

-

Before installation, lubricate all stainless steel bolts with a suitable lubricant  
(included: Weicon AntiSeize ASW 10000 or equivalent quality).

 

-

Ensure that stainless steel does not come into any contact with swarf or steel tools, 
as this may lead to corrosion.

 

-

Install the restraint system in such a way that it is impossible for contact to occur 

with sharp edges or other objects because of deflection during a fall arrest event. 

Otherwise, injuries may arise!

 

-

The professional attachment of the fall ptotection system to the building must be 
documented with dowel logs and photos.

 

-

The roof covering must be properly sealed in accordance with applicable guidelines.

 

-

The minimum free space necessary under the edge is calculated as follows:  

Deformation of the anchorage device in the event of Manufacturer's specifi

-

cation of the personal protective equipment used including deflection of the cable + 

body 1 m safety margin.

 

-

Correct use of the individual elements including personal protective equipment must 
be ensured, because otherwise the safe functioning of the INNOTECH "LIFELINE-KIT" 
is NOT guaranteed.

 

-

For horizontal use, only fasteners may be used that are suitable for this purpose 
and have been tested for the respective edges (sharp edges, trapezoidal corrugated 
sheeting, steel girders, concrete, etc.).

 

-

Do NOT use the fall ptotection system if wind speeds exceed normal parameters.

 

-

When dealing with special weather conditions (salt spreading in the winter (bridges), 
sulphurous air, etc.), the fall ptotection system components must be of "quality 
SS316" manufacture.

 

-

The fall protection system must NOT be used by children and pregnant women.

 

-

If you provide the fall protection system to external contractors, their familiarity with 

this instruction manual must be confirmed in writing.

 

-

If the fall ptotection system is sold in other countries, the instruction manual must 
be provided in the respective national language.

Содержание LIFELINE-KIT


































Отзывы: