18
EAP-QUADRAT-10 / Version 170511 / www.innotech.at
EN
16
FALL PREVENTION SYSTEM NOTICE
INFORMATION ON THE FALL PREVENTION SYSTEM
The building owner is to make this notice visible at the system access point!
Use of the system must be up to technological standards and the instruction manuals.
Instruction manuals, instpection reports, etc. are kept in:
Overview of the area with the position of anchor point:
Areas where falling through could occur (e.g. skylights and/or strip lights) must be marked!
The maximum load capacities of the anchor points are stated in the respective
instruction manuals or the type plate of the fall prevention system.
If subjected to the stress of a fall or in case of doubt, the anchor point is to be removed from use immediately and
sent to the manufacturer or a qualified repair facility for inspection and repair.
This also applies to damages to the fastening components.
