4
BARRIER-ATTIKA/190611/www.innotech.at
EN
3
SAFETY INSTRUCTIONS
3.1
GENERAL
-
The safety system may be installed only by specialised/competent experts familiar
with the system safety system, and in compliance with the current state of the art.
-
The safety system may be installed or used only by persons who are:
• trained in "personal protective equipment" (PPE),
• in good physical and mental health (medical conditions such as
cardiovascular problems, intake of medicines, consumption of alcohol, etc.
negatively affect the safety of the user.)
• familiar with the locally applicable safety regulations.
-
A plan must be available that specifies the rescue procedures for all possible
emergencies.
-
Before starting work, ensure that no objects from the work site can fall to the
ground. The area below the work site (pavement, etc.) must be kept clear.
-
Plan, install, and use the safety system in such a way that no-one can fall over the
edge if it is used correctly. See planning documents at www.innotech.at.
-
Do not make any changes to the safety system.
-
The maximum roof pitch of the installation substructure must not exceed 10°.
-
If used on inclined roof surfaces, roof avalanches (ice, snow) must be avoided by
means of suitable snow interception devices.
-
During the installation/use of the safety system, the relevant accident prevention
regulations must be complied with, as must the rules and standards for the use of
personal protective equipment designed to prevent falls.
-
When installation is complete, this instruction manual must be stored by the building
owner and made available to the user.
-
If you supply the safety system to external contractors, these latter must confirm in
writing that they have understood this instruction manual.
-
If the equipment is sold to another country, the instructions of use must be provided
in the respective national language.
-
Comply with the local lightning protection regulations.
Comply with the following safety instructions and the latest state of the art.
