18
BARRIER-ATTIKA/190611/www.innotech.at
EN
11
SYSTEM-PARAPET AT TOP
DANGER TO LIFE as a result of installation on unsuitable installation
substructure.
-
Install INNOTECH "BARRIER" on a statically load-bearing construction
concrete (solid concrete) with a concrete quality of at least C20/25.
-
DO NOT install on screed, levelling concrete, blinding concrete,
etc....
-
Ensure that dowels are used correctly, as specified in the dowel
manufacturer's guidelines (correct cleaning of bores, compliance with
curing times and processing temperature, edge distances of the dowels,
inspection of the substructure, etc.)
-
In case of doubt, have the installation substructure checked by a
structural engineer or by the manufacturer.
!
DANGER
11.5
INSTALLATION SUBSTRATE:
ADHESIVE ANCHORS
Adhesive anchor with M12 threaded rods, washer,
M12 lock nut, or nut with spring-lock washer
Penetration depth in concrete at least 100 mm
Compound mortar: FISCHER FIS SB 390 S HILTI HY 200
Use products from other manufacturers only if their
technical specifications are equivalent (compare product
data sheets).
11.6
FASTENING OPTIONS
The basic requirement for professional/correct installation is statically load-bearing
construction concrete (massive concrete)
with a
concrete quality of a minimum
of C20/25,
and the use of the original fasteners listed in this instruction manual.
INNOTECH "BEF-104"
4 x concrete anchors
