i-2000 User’s Guide
INNOSTREAM Confidential
PAGE : 84 of 92
VIS is a trademark of NeoMtel.
**Some of the contents in this manual may differ from your phone, depending on the software
installed or your service provider.
11.
Data and Fax
You can transfer data or fax to other devices via a data cable that is connected to PC. The
data cable is used to connect your phone to the PC＇s serial port.
To send and receive E-mail and faxes, connect to computer and access the Internet, you need
the appropriate data/fax communication software installed on your computer.
Also, you have to subscribe the data service when you subscribe a network service provider.
This service varies depending on the network, so contact service provider before you start
using the service.
!Note : The data cable is optional part, so you need to purchase that from your phone dealer
in order to enjoy the data/fax world.
Modem configuration setting on the PC
Your phone has an integral modem. You need to install a standard modem in your PC＇s
operating system.
- Standard modem with 19200 bit/s (115200 initialisation speed)
- Fax Class 1 modem, max 9600 bit/s
For using fax service, you need to check the fax application program on the PC as below.
- Modem initialisation: AT+IFC=1,1
- Flow Control : Software Flow Control
- 19200
initialization speed and Fax Class 1 modem
How to use the data service.
1.
Connect the data cable between the PC＇s serial port and your phone＇s external socket.
2.
Execute a dial-up Modem software on the PC.
You need to set the Modem configuration on the PC before you use.
3.
Execute appropriate data/fax program such as Internet browser on the PC.
