Innometriks Cheetah SE, Быстрый старт

Страница: 12 / 16

Keys Status Screen Display
8. Press key 8 to display Supervised Inputs. Keys 9 and 0 are
not used.
Press # to exist the status menu.
To Configure Reader Brightness
1. Press keys F2 and F4 simultaneously to display screen contrast setting. Sample text displays on line one; control keys
display on line two.
a. Use the F2 (for +) or F3 (for -) keys to increase or decrease the display contrast.
Default Factory Settings
■ Reader starts by reading a default behavioral profile "RM+CSN".
■ Web user name set to “admin”; password set to “password”
■ IP set to Static
■ IP address set to 192.168.0.100
■ RM address set to 1
■ RM baud rate set to 9600
■ Screen brightness and contrast set to normal setting
Browser Based Administration
This section provides instructions for using browser-based administration to configure the reader.
Network Connection Requirements
For each new reader, you must set network parameters before using browser-based administration to complete the
configuration across a TCP/IP network connection.
Prior to connecting to the network:
1. Have the correct network settings.
2. Ensure the reader is properly wired for 12 Vdc power.
3. Ensure the Ethernet port of the reader is connected to the network.
4. Obtain the IP Address of the reader from its LCD display. See Keypad Operation on Page 11
12
Innometriks Cheetah SE Reader Quick Start Guide