Figure 10:
RM Wiring
Wiring Supervised Inputs
Figure 11
on
Page 10
shows examples of wiring normally closed (NC) and normally open (NO) supervised inputs.
The pin numbers refer to the 9-pin Molex connectors (J7) shown in
Figure 9
on
Page 9
and
Figure 10
on
Page 10
.
Figure 11:
Examples of Supervised Inputs
Setting Up the Reader
The default or configured settings for the reader are shown in the reader LCD display. All settings can be changed through
browser based administration, except the reader's LCD brightness, which is the only setting configurable at the reader. See
Keypad Operation
on
Page 11
and
Browser Based Administration
on
Page 12
.
To begin browser based administration, you must get the reader IP Address from the reader LCD display.
10
Innometriks Cheetah SE Reader Quick Start Guide
