Installation
1. Connect the broadband Ethernet cable to the “WAN” connector.
2. Connect up to 4 telephones to MTA’s “Phone” connectors.
3. Optionally, connect your PC to “LAN” port using included RJ-45 cable.
4. Connect included AC power cable to the electrical outlet and its cable to the
MTA’s “12V DC” connector.
5. Turn the Power Switch to the On position.
6. If “VoIP” light is blinking faster, 0.5 seconds ON and 0.5 seconds OFF inter-
vals, system provisioning is in progress. Please wait until “VoIP” indicator light
is steady green.
7. At this point you have completed the MTA installation. You will hear the dial
tone when you pick up the handset of the phone or fax machine. You can now
start placing and receiving telephone and fax calls.
Figure 1
