Wall-Mounting Instructions
Optionally, you may choose to mount your MTA on the wall.
1. Drill two holes on the wall 16.7 cm apart.
2. Use a screwdriver to install one #6 metal screw in each hole. Leave the screw
heads 1/4 to 3/8 inch away from the wall.
3. Position the MTA with the ports at the top.
4. Place the unit above the screws and lower it so the screw heads are inside and
at the tops of the wall mount slots on the back of the unit.
5. Adjust to fit. If the unit is too loose, remove it from the wall, slightly tighten
screws, and rehang.
