InnoMedia MTA 3328-2R, Руководство пользователя

Страница: 67 / 84

InnoMedia MTA 3328-2R User’s Guide – Chapter 4
59
Configure PPPoE Settings Page
This page displays the following information:
Enable PPPoE
– when this checkbox has an
“x,” the PPPoE feature is enabled (the default
is disabled); to enable, click the checkbox so
an “x” appears.
Auto Connect When System Boots up
–
when this checkbox has an “x,” the auto
connect feature is enabled (the default is
enabled) and the device automatically
connects to PPPoE when the device boots; to
disable, click the checkbox so the “x”
disappears.
Service ID
– some service providers require a
service ID to connect; if no ID is required
(most service providers DO NOT require one),
the field can remain blank.
User ID
– allows you to enter your PPPoE
user name.
Password
– allows you to enter your PPPoE
password.
Authentication Protocol
– allows you to
select the protocol your service provider uses;
most ISPs use PAP, but you can contact your
service provider to find out what they use.
Idle Time Out (min)
– represents the time
limit (in minutes) after which the device will
time out; the default value is 0 (zero), which
means that the router will remain connected all
the time, which is necessary to ensure that
incoming calls will be received properly.