background image

 

InnoMedia MTA 3328-2R User’s Guide – Chapter 1 

System and Service 
Requirements 

You will need the following items/services to use the 
InnoMedia MTA 3328-2R: 

 

A broadband Internet connection (such as 
DSL, cable, or T1) 

 

A valid account from your distributor 

 

A cordless or wired analog telephone 

 

A PC with any recent Web browser (for 
managing your account details and calling 
features only) 

 

Most broadband Internet connections use 
dynamic IP addressing (DHCP), but if your 
WAN uses static IP addresses, you will also 
need the following information for the MTA 
3328-2R: 

 

IP address 

 

Netmask 

 

Gateway address 

 

DNS server address 

 

PPPoE information, if applicable 

This information is available from your 
broadband service provider or LAN 
administrator. 

About this Guide 

This User’s Guide, as well as the other instructional 
literature that accompanies the InnoMedia, is intended 
for people who have a moderate degree of experience 
installing networking equipment such as routers, hubs, 
servers, and switches, and are familiar with basic wiring 
and cabling practices. 

The table below provides a brief overview of the main 
topics covered in this Guide. 

Содержание MTA 3328-2R





















































































Отзывы: