Deploying BT200 for Voice-Enabled Workplace
Page
11 of 35
Figure 9. Input your AWS credentials
4.
Once the Role ARN and External ID parameters are validated, the setup tool continues
leads to the WiFi setup page. By default, the option to enable and configure WiFi is
checked. This will require a valid SSID and passphrase to be provided for the setup to
proceed. Alternatively, skip this step if the BuddyTalk devices are connected via Ethernet.
If the BT200 devices are to be configured to have WiFi enabled, then, enter the following
WiFi network information
.
Choose the target
Network SSID
from the drop-down menu.
The associated
Network security type
is displayed according to the selected item.
Input the
Passphrase
of the selected Network SSID.
Make sure you enable the checkbox “Connect Automatically” for the SSID from your PC’s
WiFi selection menu.
Choose
Next
.
Figure 10. Choose Network SSID and input its Passphrase
5.
If the
BT200s
need to be configured using Ethernet only without WiFi, this can be done
by having the checkbox unchecked. In this mode the units will be setup without any WiFi
information and any WiFi will be disabled.
