Innolas Laser nanio Series, Руководство пользователя и инструкция по установке

Страница: 9 / 48

1. Safety
Only authorised personnel, familiar with the potential dangers presented by laser
equipment during operation or installation, are allowed to work with the laser system.
It is of utmost importance that personnel working with the system read, understand
and observe the information and instructions in this manual.
WARNING
Risk of exposure to laser radiation
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
The nanio is a Class IV laser intended to be used as part of an integrated laser-based
processing system.
Safe use of this equipment is reinforced by safety labels fixed to the equipment in a
visible manner. The type of safety labels used and their location is detailed in section
1.4.
The use of controls, replacement parts, adjustments, or procedures other than those
specified within this manual may result in exposure to any of these hazards.
• Laser hazards
• Electrical hazards
• Environmental hazards
• Mechanical hazards.
The degree of seriousness of the hazard is indicated by the use of the following signal
words:
DANGER
Indicates an imminent hazard which, if not avoided, is extremely likely to result in
death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury. It is also used to alert the user against unsafe working
practices and potential damage to the equipment.
1.1. Qualification and training of personnel
Personnel who install and/or operate the laser must be adequately qualified for the
work concerned and should have read this manual. the user must clearly specify the
sphere of responsibility, competence and
nanio Industrial DPSS Laser User and Installation Manual
1 1. Safety